18
Onboard Weighing |
FT-30M
| www.flintec.com
Calibration - Single Channel
Calibration
If calibration was not completed in the first set-up, or needs subsequent adjustment follow these steps. Access to a weighbridge is
required. Calibration is performed whilst stationary and on flat ground by entering tare (unladen) weights. Calibration is completed by
loading the vehicle to its legal maximum and weighing the vehicle to obtain the Net Payload.
1� Home
Navigate to the menu.
Press :
2� Menu
Navigate through the User Functions.
Press :
3� Settings
Enter the Settings menu. (Pin code protected)
Press :
4� Pin code
Swipe up or down to enter pin code.
Press :
5� Calibration Settings
Enter the Calibration Menu.
Press :
6� Calibration - Channel 1
Begin Channel 1 calibration.
Press :
7� Tare
Weigh unladen vehicle. (Tare weight)
Press
to enter the Tare weight.
8� Tare Weight
Input the unladen (Tare) weight. (13, 450kg)
Press :
Weighbridge: 13,450kg
*previous
calibration figured
are displayed.
v1_000020_FT-30M 21/06/2016
