1
Onboard Weighing |
FT-30M
| www.flintec.com
About this Manual
Copyright
All rights reserved. No part of this document may be copied, reproduced, republished, uploaded, posted, transmitted,
distributed, stored or introduced onto a retrieval system in any form, or by any means (electronic, mechanical, photocopying,
recording or otherwise) whatsoever without prior written permission of Flintec AB or any of its subsidiaries.
Disclaimer
In order to improve design, performance and reliability, we reserve the right to make changes to the products contained in
this manual. The information in this manual is believed to be accurate in all respects at the time of publication, but is subject
to change without notice. Flintec AB, its subsidiaries or its distributors assume no responsibility for any consequences resulting
from the use of the information provided herein.
Software Versions
All Flintec instrumentation is subject to continuous improvement and updates. This manual covers FT-30M on-board
weighing indicator software versions from April 2016. If your instrument is a previous version and you require an upgrade to
the most current software, please visit the Flintec web site where the latest software update can be downloaded. Uploading
software updates is explained in this manual. Please note, some options may require additional hardware to function
properly.
Safety
This manual is intended for use by service technicians and operators responsible for installing and setting-up the Flintec FT-
30M on board weighing indicator. Failure to follow these instructions could result in damage to the indicator or injury.
Safety Precautions
Do not operate or work on this equipment unless you have read and understand the
instructions and warnings in this manual. Health and safety is your responsibility. Do
not use weighing indicator whilst driving.
Symbol Definitions
Indicates a potentially hazardous situation that, if not avoided could result in minor
or moderate injury, and includes hazards that are exposed when guards are removed.
Indicates information about procedures that, if not observed, could result in damage
to equipment.
Indicates an important procedure that must be followed to ensure correct set-up and
use.
warning
important
v1_000003_FT-30M 21/06/2016
