29
Onboard Weighing |
FT-30M
| www.flintec.com
11� Set Delay
Swipe up or down to set the desired delay setpoint. (3s)
Press :
12� Test Alarm
Externally fitted alarms can easily be tested.
Press :
to test the alarm. To return press
13� Alarm 2 -Red
Alarm 2 can be set by following the same steps above.
Packer Plate Cut-Off (PPCO) can be toggled on/off by pressing
Amber alarm threshold reached. Alarm 1
triggered.
Alarm bar is empty when gross weight is
< 80% of Amber weight.
Alarm bar incrementally fills. (88%)
Alarm bar incrementally fills. (94%)
Red alarm threshold reached. Alarm 2
triggered.
10� Alarm 1 - Delay
Select alarm delay.
Press :
Alarm and PPCO Settings
9� Set Gross Weight
Swipe up or down to set the desired Gross weight alarm setpoint. (26,400kg)
Press :
If the weight of the truck exceeds 26,400kg for a sustained 3 seconds, the alarm will trip.
Alarm Bar
The alarm bar is displayed below the weight on the Home Screen.
When the gross weight of the truck hits 80% of the set Amber weight, the bar will fill at 2% increments from 80% to 100%.
Using the alarm settings above where Alarm 1 = 26,400kg and Alarm 2 = 27,000kg
v1_000031_FT-30M 21/06/2016
