12
Onboard Weighing |
FT-30M
| www.flintec.com
First Installation Set-up
Power-on and First Set-up
Settings are entered on first set-up or any time later. All settings can be changed. Turn ignition on, you will be asked to follow this setup
procedure. Access to a weighbridge is required. Calibration is performed by entering tare (unladen) weights whist stationary and on flat
ground. Calibration is completed by loading the vehicle to its legal maximum and weighing the vehicle to obtain the Net Payload.
1� Language
Swipe up or down to select a language.
Press :
2� Time Zone
Swipe up or down to select a time zone.
Press :
3� Date Format
Swipe up or down to select a date format.
Press :
4� Date
Swipe up or down to select the date.
Press :
5� Time
Swipe up or down to select the time.
Press :
6� Weight Units
Swipe up or down to select a weight unit.
Press :
7� Single Channel Calibration
Begin Channel 1 calibration.
Press :
8� Tare
Weigh the unladen vehicle. (Tare weight)
Press
to enter the Tare weight.
empty
Weighbridge: 12,580kg
v1_000014_FT-30M 21/06/2016
