Fliegl VFW, Руководство по эксплуатации

Страница: 17 / 32

15
9.2 General safety and operating instructions
The following section contains some general notes on safety and operation for working with the tank trailer, repeated and
summarized together for better clarity:
- In addition to the information in these operating instruction, you must also observe the generally applicable safety and
accident prevention regulations.
- Attachments must only be used if all safety devices are in place and in the protective position.
- Before starting work, you should familiarise yourself with all devices and controls as well as with their function. It is too late to
do so once work has started.
- When handling slurry, be aware that the gases produced are highly toxic, and explosive when combined with oxygen. Naked
flames, light testing sparks, and smoking are therefore forbidden.
- During flooding or alternate flooding operations, particular care should be taken due to gas formation in the area of the open
valve to the trough mixer, or main container or cross-channels, as well as at the stirring and removal positions when the
agitators or pumping stations are active.
- Always ensure sufficient ventilation and/or air supply when working with slurry.
- Only perform maintenance work when the containers are empty.
- The weights and loads specified on the type plate must be observed.
- Never park tanks on the supporting mechanism when loaded.
- The drive shafts must meet the requirements of the attachment manufacturer.
- Do not stand on the drive shaft.
- Do not enter the work area while parts (drive shaft) are still rotating.
- Before first-time start-up, move all protective devices to the safety position.
- There must be no persons in the danger zone (suction nozzle) during slurry application/filling.
- Leave all gate valves open during storage in winter. Risk of frost damage!
- The compressor must not be overheated.
9.3 Compressor changeover
– Battioni
DISCHARGE
CONTAINER DEPRESSURISED SUCTION
Fig. 34
:
View of adjustment lever
9.4 Compressor changeover
– Hertell
DISCHARGE CONTAINER DEPRESSURISED SUCTION
Fig. 35
:
View of PTO stub