Flex innovations FeatherLite RV-8 70cc FLS, Инструкция по эксплуатации

Страница: 74 / 96

RV-8 70cc FLS Instructions
70
each of the holes to harden the threads cut by the screw. Let the CA fully cure before
mounting the Aura and securing the (4) screws.
⃞
1B. If not using the Aura, choose a mounting location for your receiver. It can be mounted in
the same location as the Aura in the image above if desired. Keep your CG in mind as well
when choosing a mounting location. We recommend using hook and loop tape on the
back of the receiver, as well as a hook and loop strap to secure it in place.
⃞
2. Locate the receiver switch location just under the canopy, and just in line with the Aura &
receiver area as indicated in the picture above. Note that there are switch locations on
both sides of the fuselage to suit your preference. Remove the covering from the hole of
your choice using a hobby knife with a #11 blade. Mount your switch, being sure to orient
the on/off plate properly. If your switch mounting screws thread into metal fittings or
nuts, be sure to use blue thread lock. If your switch mounting screws thread into plastic,
DO NOT use thread lock as it may damage the plastic.