Flex innovations FeatherLite RV-8 70cc FLS, Инструкция по эксплуатации

Страница: 43 / 96

RV-8 70cc FLS Instructions
39
ENGINE AND THROTTLE SERVO INSTALLATION
The RV-8 70cc FLS is designed for 50-60cc single cylinder engines, or twin 70-76cc engines.
This manual will cover the installation of the DA-70 and the DA-60.
DA-70 ENGINE INSTALLATION
Required for this section
Components Tools Adhesives/Building Materials
o
Fuselage Assembly
o
Engine
o
Engine Standoffs (20mm)
o
¼ -20 Blind Nut (4)
o
¼ -20 x 1-1/2-inch Socket
Head Screw (4)
o
¼ -inch flat washer (4)
o
Drill
o
1/8-inch (3mm) Drill Bit
o
5/16-inch (8mm) Drill Bit
o
¼ -inch Hex Driver
o
Blue Thread Lock
⃞
1. Remove the plywood structure on the fuselage, just below the motor box and behind the
throttle servo mounting location by pushing with your fingers. If this does not push out
easily, you can trace the shape with a sharp #11 hobby knife to make it easier to remove.
Regardless of the exhaust system used, this must be removed for proper cooling.