FLENDER DX2000+ Скачать руководство пользователя страница 43

Страница: 43 / 82

Assembly

5.3 Mounting the CMS

S6300-01en

Edition 10/2022

• Seal unused cable glands against dust.

• For electrical insulation: Note the connection assignment.

• Insulate the cables if required.

• Expose the shielding and lay the shielding according to chapter Electrical connection

(Page 46).

• Attach the cables as indicated in the wiring diagram or plug them into the corresponding

slots.

• Tighten the PG cable glands.

During installation, observe the tightening torques for the screwed connections as specified
in the following table.

Screw type

Tightening torque

Description

3 Nm

Earthing

25 Nm

Control cabinet assembly on the wall

Table 5-1:

Screw fasteners

5.3.2

Assembling the sensors

5.3 Mounting the CMS

5.3.2.1

Safety information for mounting the sensors

5.3 Mounting the CMS

DANGER

Danger to life due to electric shock

Electric shock results in fatal injuries.

•

Prior to starting work, switch off the power supply to the system via the mains discon-
nection device.

•

Secure the system against being switched on accidentally.

•

Close the mains disconnection device and put up warning signs.

•

Ensure all work is carried out by trained and authorised specialist personnel only, ob-
serving the safety instructions and the applicable accident prevention regulations.

•

When working around rotating parts, also press an emergency stop button.

Information

Support during assembly

If you need assistance with assembling the sensors, contact Service and Support
(Page 65).

Ensuring the sensors are correctly fastened and in the right position is crucial to the meas-
uring accuracy.

•

Ensure that the sensors are tightly connected to the measuring points specified in the
gear unit documentation.

•

Do not use sheet metal, plastic or thin components for the sensor assembly.

Содержание DX2000+


















































































Результаты поиска

Содержание DX2000+

Отзывы:

Похожие инструкции для DX2000+

Бренды по названию

Популярные бренды

FLENDER DX2000+, Руководство по эксплуатации

Результаты поиска

Содержание DX2000+

Отзывы:

Похожие инструкции для DX2000+

Бренды по названию

Популярные бренды