manualshive.com logo in svg

FLENDER ARPEX, Руководство по эксплуатации

Поделиться
Скачать
FLENDER ARPEX Скачать руководство пользователя страница 47

47

ARPEX 8706 en
Operating instructions  10/2017

NOTICE

Material damage

Risk of damage to the coupling and the shaft

– The coupling parts must be fitted with the aid of suitable equipment to avoid damaging the shaft

bearings through axial joining forces. Use suitable lifting gear.

– The information specified on the dimensioned drawing relating to the pulling­on path must be

observed.

– Observe the order­related entries on the drawing of the coupling relating to the joining temperature.

WARNING

Danger of burns

Serious injury through burns on hot surfaces (> 55 °C) possible.
Wear suitable protective gloves and protective clothing.

WARNING

Risk of serious injury through flying fragments

Risk of serious injury through flying fragments and/or risk of damage to the coupling.
The coupling module must be axially secured.

Remove the dummy flange after the test run.

NOTICE

Damage to the coupling, damage to other components

Damage to the coupling and the shaft through incorrect pulling off.
The coupling parts must be pulled off the shaft end using suitable devices.
Use suitable lifting gear.

WARNING

Risk of serious injury through flying fragments

Risk of serious injury through falling coupling parts and/or flying fragments and/or risk of damage to the
coupling.

– The coupling module must be axially secured.

– Observe the permissible demounting pressure and temperature values specified on the

order­specific drawing of the coupling.

Содержание ARPEX

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды