24
ARPEX 8706 en
Operating instructions 10/2017
5.5.3
Type
MHM
Detail "Y"
4
5
Y
Y
1
1
2
2
3
*)
M
M
H
Fig. 15:
Type
MHM
1
"M"
hub
2
Screw connection of flange
3
"H"
module
(intermediate unit)
4
Cheese-head bolt
5
Distance bushes
"Y"
Fastening
*
)
The plate packs must not be demounted or retightened!
The plate packs have been secured for the transport with special fastenings (spacer bushes and
cheesehead screws; see detail
"Y"
in figure 15).
The screw connections of the flanges (see figure 15) are delivered in separate packing units for each
coupling. The packing unit may contain additional spare screw connections.
Depending on the coupling version, shims may be delivered, which are used for compensating the shaft
distance
"DBSE"
. The procedure is described in item 6.6.
