© 1999-2007 QualityWaterForLess.com
- 3 -
•
If your tank is not filled, please follow the additional instructions below.
•
First, place the riser tube into the tank as shown in Figure 2.
NOTE: Please be
sure that the riser tube seats into the bottom of the tank, and that the top of
the riser tube is FLUSH with the top of the tank lip.
FIGURE 2
•
Before filling the tank, place a piece of duct tape over the top of the riser to
prevent resin from dropping down inside the riser tube as shown in Figure 3.
•
Place the included filling funnel over the top the tank as shown in Figure 4, and
prepare to fill the tank. Since the 9100SXT is a twin system, please be sure to fill
½ of the included resin for each tank.
If your softener system came with
Gravel, please pour this amount into the tank FIRST, then pour in the
included resin media afterwards.
Please note that you must split the amount of
supplied resin and gravel EQUALLY for EACH tank shipped!
FIGURE 3
FIGURE 4
