© 1999-2007 QualityWaterForLess.com
- 12 -
FIGURE 30
FIGURE 31
FIGURE 32
FIGURE 33
•
To enter master programming mode, press the “UP” and “DOWN” buttons
TOGETHER and HOLD for 5 seconds, and then release the buttons, as shown in
figure 34 below.
•
The display should now show “DF / GAL” as shown in figure 35 below. (This
indicates U.S. Operation Mode - Gallons)
Do not change this value, and press
the “Extra Cycle Button” once to continue
.
FIGURE 34
FIGURE 35
•
The display should now show “VT / St1b”as shown in figure 36 on the following
page. (This indicates Valve Type 9100 Mode)
Do not change this value, and
press the “Extra Cycle Button” once to continue
.
