Flavor Burst JBT 80FCB-2B, Оборудование, техническое обслуживание и эксплуатация: Руководство

Страница: 59 / 64

58
4. Select the flavor(s) by touching the flavor
button. More than one flavor can be
selected for a multi-flavor serving.
Selected flavors show a green check mark.
To deselect a flavor, touch the button again.
NOTE: FLAVORS WILL DISPENSE IN THE
ORDER THEY ARE SELECTED, AND WILL
REPEAT THE CYCLE UNTIL THE SERVING
IS DONE.
NOTE: SERVING SIZE MAY DETERMINE
HOW MANY FLAVORS CAN BE SELECTED.
FOR EXAMPLE, A SMALL SERVING MAY
ONLY ALLOW TWO FLAVORS BECAUSE
THE FLAVORS ARE SET TO DISPENSE FOR
A PRESET TIME. TO ADJUST THE SERVING
SIZE TIME OR FLAVOR DISPENSE TIME,
SEE SECTIONS “GENERAL SETTINGS” AND
“ADJUST DISPENSE TIME LIMITS” OF THE
MAINTENANCE MENU.
NOTE: THE SCREEN AND SELECTIONS
WILL TIME OUT AFTER A DESIGNATED
PERIOD OF TIME. TO SHORTEN OR
LENGTHEN THAT TIME, CHANGE THE
RESET DELAY IN “GENERAL SETTINGS” OF
THE MAINTENANCE MENU.
5. MANUAL DRAW SYSTEM: Hold a cup
under the spout. Pull the draw handle all
the way into the open position. If you have
the timed servings enabled, draw the
serving until the system sounds a beep and
the screen notifies you to stop drawing
product and then return the handle to the
closed position at the end of the serving.
Otherwise, draw the serving till the cup is
nearly full.
NOTE: THE SYSTEM DISPENSES THE
FLAVORS IN THE ORDER THEY WERE
SELECTED. ALLOW ENOUGH TIME FOR
EACH OF THE FLAVORS TO CYCLE
THROUGH. IF THE SERVING IS CUT OFF
TOO SOON THE SYSTEM MAY NOT
DISPENSE ALL THE CHOSEN FLAVORS IN
YOUR SERVING.
26211