Flavor Burst JBT 80FCB-2B, Оборудование, техническое обслуживание и эксплуатация: Руководство

Страница: 30 / 64

29
7. Touch the flavor of the line that will be
flushed and follow the instructions outlined
on the Jumbo Touch Panel screen to flush
the syrup line.
NOTE: FLUSH THE LINE FOR THE FULL 15
MINUTES TO COMPLY WITH SANITATION
GUIDELINES.
8. While the line is flushing, pull the tray
forward and remove the syrup bag. Discard
the syrup bag if it is empty or expired. If the
bag has usable syrup, store the syrup as
directed on the label.
9. Clean the syrup tray with a single service
towel and detergent water, rinse and dry.
10. Select the flavor you wish to use, then place
the bag on the table with the fitment up and
remove the dust cap.
11. Lifting up with the bag fitment, press the
center pin of the bag fitment valve and
gently press on the bag to release any
excess air.
12. Place the tray up-side-down over the bag
and pull the fitment into the tray opening as
shown. The grooves of the bag fitment
should slide into the tray opening.
13. Holding the fitment in place, raise the open
end of the tray and flip the tray right side up.
As the tray is set back down, allow the bag
to settle in the tray.
26190
26192
26193
26194
26195