Flavor Burst JBT 80FCB-2B, Оборудование, техническое обслуживание и эксплуатация: Руководство

Страница: 29 / 64

28
NOTE: BE SURE TO PLACE A CONTAINER
UNDER THE BLENDING HEAD TO CATCH
THE PRODUCT AND SANITIZER SOLUTION.
NOTE: YOUR HANDS SHOULD BE CLEANED
AND SANITIZED BEFORE YOU PERFORM
THE FOLLOWING PROCEDURE.
NOTE: THE FOLLOWING PROCEDURES
REQUIRE APPROVED, SERVICEABLE AND
SANITIZED TOOLS AND BRUSHES.
CONTACT YOUR LOCAL DISTRIBUTOR FOR
RECOMMENDED SUPPLIES.
NOTE: USE AN APPROVED CLEANER AND
SANITIZER FOR THE FOLLOWING
PROCEDURES. REFER TO
MANUFACTURER’S INSTRUCTIONS FOR
PROPER PREPARATIONS OF THESE
CLEANING AGENTS.
NOTE: INSPECT ALL WEAR ITEMS AND
REPLACE IF NECESSARY.
Each syrup flavor is stored inside a numbered
tray (1-8) within the system cabinet. Under
normal operating conditions, flavors are
installed as previous flavors become empty.
However, you may change flavors periodically
as desired.
1. Mix approved detergent with warm water
according to manufacturer’s instructions.
Also prepare approved sanitizer solution
according to manufacturer’s instructions.
2. Place a cup or container under the spout.
3. Disconnect the Syrup Bag Connector from
the syrup bag being changed.
4. Locate the Pump Flush Adapter under the
bottom trays and connect it to the Syrup
Bag Connector.
5. Press and hold the top left corner area on
the Jumbo Touch Panel screen to access
the Flavor Burst Maintenance Menu. If the
screen asks for a password, enter the
password.
6. Scroll down to the Maintenance Functions
section and touch the key named “Flushing
Functions”.
26270
26272
REPLACING THE SYRUP FLAVORS