Fläkt Woods
8666 GB 2010.06
Specifications are subject to alteration without notice
Installation and maintenance instructions
Control equipment
15
Fig. 10
Electrical connection of units in blocks
When the separate air handling units have been mechani-
cally docked the blocks must be connected electrical.
Connect the signal cables to the distribution board in the
cable trunking or junction box. Connect the cabling to
(pos. 3, see page 16) and the screen to the adjacent pins,
see the figure below. In the same way connect the power
cabling to the distribution connection in the cable trunking
or junction box. The appearance and function of the junc
-
tion depends on whether power is to be routed to further
blocks or other loads, e.g. fan motors. Connect the 4-pole
contact to the signal board (pos. 12, see page 16).
Содержание eq Controls
Страница 55: ......
