eCO Side - Installation and Maintenance Manual
25
FläktGroup DC_10176GB_20180924_R3
Specifications are subject to alteration without notice
9.6.4 CO
2
-CONTROL
C0
2
-control is only active in normal speed. In trickle or boost
speed set the fan speed in %.
1. Set the desired CO2-value
2. Choose CO2 low limit. The value tells if the lower limit shall
be trickle or normal speed. The speed cannot decrease
under this value.
3. Set the ratio between exhaust and supply air. The exhaust
fan is master and the supply fan is slave.
For the rest of the settings see section 9.6.1.
9. CONTROL PANEL, OPERATIONS, COMMISSIONING
Set the desired pressure in Pa. Constant pressure control is
only active in normal speed. In trickle or boost speed set the fan
speed in %.
For the rest of the settings see section 9.6.1
