Lit. No. 44224, Rev. 14
54
August 15, 2011
OPERATING YOUR SNOWPLOW
Control Functions
Raise, Lower, Float, Angle
Moving the control lever in straight lines up and
down or from side to side on the control body will
result in the blade movements described in the
following tables.
L
R
RAISE
LOWER
ON/OFF
FLOAT
SCOOP
RETRACT
3
WING
IN/OUT
4
WING
IN/OUT
2
1
FLOAT Light
(green)
Function Description of Operation
RAISE
Move the control lever toward the
top of the control body to raise the
snowplow and cancel the FLOAT mode.
Function times out after 3.5 (XLS) or
4.0 seconds (XtremeV).
LOWER
Move the control lever toward the bottom
of the control body to lower the snowplow.
Release the lever to stop blade at desired
height.
FLOAT
Move the control lever to the
LOWER
position and hold 3/4 second to activate
this mode. The FLOAT light in the upper
right corner of the control face will
illuminate. The blade will lower to the
ground surface and follow the contour of
the surface as it dips or raises. Function
does not time out; however, control will
shut down after 20 minutes of nonuse.
Move lever to the
RAISE
position
momentarily to cancel FLOAT. Angling left
or right will not interrupt (stop) the FLOAT
function.
Содержание Minute Mount 2 system
Страница 3: ......
Страница 111: ...Lit No 44224 Rev 14 112 August 15 2011 NOTES ...