background image

4

19. Adjustable, Double-Locking Lower Stem:

Fiber glass reinforced nylon stem with a steel
spring clip to keep it in perfect alignment and a
positive grip injection-molded ABS lock nut.

20. Balanced and Comfortable:

 The universal

arm rest detector stand along with Fisher's "S"
handle design and pistol-grip mounted control
housing give the CZ 70 Pro superior balance and
maximum comfort.

21. Spider Coils:

 Your choice of an all-purpose, 8-

inch Spider coil or a deep-seeking 10 1/2-inch
Spider coil. They're light, tough and have open
centers for accurate pinpointing. The hot, little 5-
inch coil is great for extremely trashy areas, tight
spots or highly mineralized ground.

22. Three-Piece Breakdown:

 The CZ-70 Pro

breaks down to fit into an optional carrying case
not much bigger than a briefcase and small
enough for most airline carry-on luggage.

23. Last-Setting Turn-On Memory:

 When you turn

your CZ-70 Pro on, it automatically sets the
Sensitivity, Volume, Notch and Mode exactly as
they were when you turned it off (even if the
batteries have been removed!). Note that no
battery drain is required to retain your last settings
in memory.

24. Body Mount or Handle Mount: 

Just slide the

control housing off the handle grip, snap on the
belt loop and put it on your belt. What's left is so
light it will feel like part of your arm.

Read this instruction manual thoroughly, practice often and
you're in for some exciting treasure hunting. Drop us a line if
you have any questions, comments or good finds to tell us
about. In the meantime. . .

Happy Hunting,

FISHER RESEARCH LABORATORY

ABOUT YOUR DETECTOR

Содержание CZ-CZ-70 PRO Quicksilver

















































Отзывы: