TURN ON PROCEDURE
1.
(optional) Adjust your headset volume controls
to minimum, and plug the headphone jack into
the CZ-70 Pro control panel. Leave the headset
around your neck for now.
2.
When you first turn the power on, you will
probably notice a momentary display on the
LCD. This is normal for the CZ-70 Pro. Set your
controls as follows:
3.
(optional) Put your headset on and gradually
increase the CZ-70 Pro volume to a comfortable
level when the coil is passed over a large,
shallow target.
NOTE:
If your headset has volume controls, first adjust your
headset volume controls to minimum and the CZ-70 Pro
volume to maximum. Then gradually increase the headset
controls to a comfortable level when the coil is passed over a
target. Note that small, deep targets now respond with the
same loud zap as large, shallow targets. To defeat the faint-
target, audio boost feature, adjust the CZ-70 Pro volume to 4
or lower.
GROUND BALANCE = 10
AUTO/I.D. = I.D.
for normal use in target I.D. mode.
(use AUTO mode for deep search, all-metal, autotune mode)
SENS = 10
VOLUME = 0
NORM/SALT = NORM
for normal search areas (use SALT
mode for wet sand hunting)
16
