9
b.
Remove light bulb by firmly grasping and depressing lamp slightly and rotating in a
counter-clockwise direction until it pops up.
c.
Using Fisher Science Education replacement lamp no S74024 (12volt 10watt double
contact base) insert new lamp by gently pushing into socket and rotate in a clockwise
direction until it pops into place. Wipe bulb to insure that it is clean and free of all
fingerprints.
d. Replace light housing by rotating in a clock-wise direction until tight.
K. Replacing the Incidental (Top) Lamp on Middle/High School Stereo Models S71004, S71004A,
S71005, S1005B, S71006, S71006A and S71006B:
a. Remove the knurled light housing locking screw located on side of rectangular shaped
lamp housing.
b. Remove the rectangular shaped light housing and expose top bulb.
c.
Gently grasp bulb and pull bulb from two tension clips, which hold it in place.
d.
Using Fisher Science Education replacement lamp no S74021 (12volt 10watt) holding new
bulb with tissue (to avoid getting body oil on surface of bulb), push bulb into tension clips
until it slips into position.
e. Replace light housing and lock in place with knurled locking screw.
L.
Replacing the Transmitted (Bottom) Lamp on Middle/High School Stereo Models S71004,
S71000A, S71005, S71005B, S71006, S71006A, S71006B and S71012B:
a.
To replace transmitted (bottom light), loosen setscrew located at side of base and remove
stage plate. Removing stage plate will expose the bottom bulb.
b.
Gently grasp bulb and pull bulb from two tension clips, which hold it in place.
c.
Using Fisher Science Education replacement lamp no S74021 (12volt 10watt) holding new
bulb with tissue (to avoid getting body oil on surface of bulb), push bulb into tension clips
until it slips into position.
d. Replace stage plate and secure with locking setscrew.
M. Replacing the Incidental (Top) Illuminator Halogen Bulb on Digital Stereo Model S71012B:
a. Remove front lens housing from microscope by rotating in a counter clockwise direction.
b.
Remove light bulb by firmly grasping and pulling straight out from bi-pin socket
c.
Using Fisher Science Education replacement lamp no S74027 (12 volt 10 watt bi pin
halogen) orientate the two pins with the socket and firmly push pins into socket.
d. Replace top lens housing by rotating in a clock-wise direction until tight.
N.
Replacing the Transmitted (Bottom) Lamp on Digital Stereo Model S71013:
a.
Gently lay microscope on its side to reveal base plate on bottom of illuminator base.
b.
Observe screws located in rubber feet. Using a screwdriver, remove the rubber feet and
base plate to expose bulb.
c.
Remove light bulb by firmly grasping and pulling straight out from bi-pin socket
d.
Using Fisher Science Education replacement lamp no S74028 (12volt 10watt Halogen bi-
pin base) orientate the two pins with the socket and firmly push pins into socket.
e. Replace base plate and secure rubber feet.
O.
Replacing the Transmitted (Bottom) Lamp on College Stereo Models S71008, S71008A,
S71009, S71009A and S71010:
a.
Gently lay microscope on its side to reveal base plate on bottom of illuminator base.
b.
Observe screws located in rubber feet. Using a screwdriver, remove the rubber feet and
base plate to expose bulb.
c.
Grasp fluorescent lamp and pull bulb from socket.
d.
Using Fisher Science Education replacement lamp no S74019 (5watt fluorescent) holding
push bulb into tension clips until it slips into position.
e. Replace base plate and secure rubber feet.
P.
Replacing the Incidental (Top) Lamp on College Stereo Models S71008, S71008A, S71009,
S71009A and S71013:
a. Remove top lampshade by grasping it and rotating in a counter clockwise direction
Содержание S7001B
Страница 1: ...Microscope Instruction Manual...
