Fisher Science Education S7001B, Инструкция по эксплуатации

Страница: 21 / 40

21
MODEL S71003 and S71003A
Model S71003 is supplied with DIN standard 4X
(0.10N.A.), 10X (0.25 N.A.) 40X (0.65N.A.) retractable,
and 100X (1.25 N.A.) retractable oil immersion objective
lenses. Model S71003A is supplied with ASC DIN 4X
(0.10N.A.), 10X (0.25 N.A.), retractable 40X (0.65N.A.), and
retractable 100X (1.25 N.A.) oil immersion lens.
Filters: Insert 32mm diameter filter into condenser swing
out filter holder, then insert 45mm neutral filter into the
recess located on top of illuminator condenser lens.
Illumination: Insert power plug into 12 volt DC switching
power converter, then insert plug on other end of
converter into power jack on back of microscope base.
Plug AC cord into either a 120v or 240v outlet and
converter automatically switches to proper output voltage.
To operate this series of microscopes see General
Instructions for use of a Compound Microscope located
on pages 14 and 15.
Lamp replacement: For Halogen lamp replacement see
page 8 (H).
Fuse replacement: See Replacing Fuses located on page
10 (R).
Model S71003B and S71003C
Objectives on Model S71003B same as S71003, and
objectives on Model S71003C same as S71003A as
shown at the top of this page.
Follow instructions for models S71003 and S71003A at
top of this page with the following exceptions.
These Dual viewing heads, with 30
°
inclined eyepieces,
providing comfortable viewing for primary viewer. Also
includes is a vertical eyepiece so that a second viewer
can observe the image simultaneously. Primary viewer
focus microscope with coarse and fine focus knobs then
second viewer adjusts the diopter to adjust for differences
in eyesight.
Lamp replacement: For Halogen lamp replacement see
page 8 (H).
Fuse replacement: See Replacing Fuses located on page
10 (R).