Fisher Science Education S7001B, Инструкция по эксплуатации

Страница: 22 / 40

22
MODEL S71003D, S71003E and S71003F
Objectives on Model S71003D same as S71003, and
objectives on Model S71003E same as S71003A as shown on
page 21.
Model S71003F is supplied with Plan Achromat DIN 4X (0.10
N.A.), 10X (0.25 N.A.), retractable 40X (0.65N.A.); retractable
100X (1.25 N.A.) oil immersion objective lenses.
Follow instructions for models S71003 and S71003A located
on page 21 with the following exceptions:
• Adjust interpupillary distance (spacing between the
eyes). While viewing through the eyepieces, slide the
eyepiece tubes in or out until images blend into one.
Check interpupillary scale and note index the reading.
• Adjust the diopter scales, located on left and right each
adjustable eyepiece tubes to the same numerical value
as indicated on the interpupillary index scale. This is
required to maintain parfocality of objective lenses.
After properly focusing instrument adjust ocular tube
diopters to compensate for the difference between left
and right eyes.
Lamp replacement: For Halogen lamp replacement see page
8 (H).
Fuse replacement: See Replacing Fuses located on page 10
(R).
MODEL S71003G, S71003H and S71003J
Use instructions for Binocular versions S71003D, S71003E
and S71003F located top of this page.
In addition, these models are equipped with a vertical port on
top of head with a sliding 3 position sliding rod that permits
user to select viewing required for his needs. Rod pushed
completely into head allowing 100% of microscope image to
be directed to binocular eyepieces. Pull rod out until you feel
a gentle click (Mid-position) that directs 100% of image to be
directed to vertical port. Pull rod to fully extended position
and 30% of image is directed to binocular eyepieces, 70%
directed to trinocular port.
Lamp replacement: For Halogen lamp replacement see page
8 (H).
Fuse replacement: See Replacing Fuses located on page 10
(R).