![background image](http://html1.mh-extra.com/html/fisher-price/t2713/t2713_manual_2297876042.webp)
42
Problem
Probable Cause
Solution
Motor is not running; no swinging
Power is not on
Turn the power dial to one of six settings.
Batteries incorrectly installed
Remove the batteries and replace in correct
orientation, as indicated inside the
battery compartment.
Dead batteries
Replace all four batteries with four, fresh “D”
alkaline
batteries.
Motor is running but swinging stops after
a few minutes
Need to start swinging motion
To start swinging motion, give the seat a light push.
Swing motion setting is inappropriate for
child’s weight
Adjust the power dial to a higher speed setting and
give the seat a light push.
Weak batteries
Replace all four batteries with four, fresh “D”
alkaline
batteries.
No difference noticed in swinging motion after
power dial is adjusted
Swing did not have sufficient time to adjust to
different setting
Allow the swing time to adjust to new setting.
Weak batteries
Replace all four batteries with four, fresh “D”
alkaline
batteries.
Swinging motion too high even at the lowest setting
Normal operation
To slow swinging motion, place one end of a blanket
underneath your child and let the other end drape
down while swinging.
Waterglobe (lights)/mobile, music/sounds do not
work and swing is off
Power dial is not on correct setting
Position the power dial to the
position.
Dead batteries
Replace all four batteries with four, fresh “D”
alkaline
batteries.
Waterglobe (lights)/mobile, music/sounds turn off
automatically after seven minutes
Press the reset button
to restart waterglobe
(lights)/mobile, music/sounds for another
seven minutes.
Music/sounds do not work (and power dial is set
to
)
Music/sounds switch is in OFF
position
Slide music/sounds switch to desired
setting
.
Music/sounds turn off automatically after
seven minutes
Press the reset button
to restart music/sounds for
another seven minutes.
Waterglobe (lights) does not work (and power dial is
set to
)
Mobile/waterglobe switch is in OFF
position or
mobile only
position
Slide mobile/waterglobe (lights) switch to desired
setting
.
Waterglobe (lights)/mobile turn off automatically
after seven minutes
Press the reset button
to restart waterglobe
(lights)/mobile for another seven minutes.
Mobile does not work (and power dial is set to
)
Mobile/waterglobe (lights) switch is in OFF
position or waterglobe only
position
Slide mobile/waterglobe (lights) switch to desired
setting
.
Mobile/waterglobe (lights) turn off automatically
after seven minutes
Press the reset button
to restart mobile/
waterglobe (lights) for another seven minutes.
Problems and Solutions
Содержание T2713
Страница 53: ...53 D D D D...
Страница 55: ...55 D D D D...