Fisher & Paykel Titan Aerotech OD302EU Скачать руководство пользователя

Страница: 58 / 71

Service Manual 546596A: 302 Series Titan Oven

June 2005

7.13

Oven Lamp Glass and Bulb

Location:

Oven cavity back corners and top of the oven cavity opening.

Removal

1. Remove the glass cover by swivelling the

retaining tab upward to clear the edge of
glass.

Note:

The retaining tabs are designed to be

swivelled using a flat head screwdriver.

2. Remove the faulty bulb.

Caution:

Do not handle halogen bulbs with

bare hands. Use gloves or a cloth rag.

Reassembly

Refit in reverse manner.

Note:

Ensure the glossy side of the glass cover is facing the inside of the oven

cavity.

7.14

Oven Lamp Assembly

Location:

Rear corners and top, front of the

oven cavity

For Rear Lamp Assemblies
Removal

1. Follow the general servicing instructions for

components in the back panel area. (refer to
Section 7.3)

2. Remove the lamp cover and bulb. (refer to

Section 7.13)

3. Remove the lamp body retaining screws and

the lamp holder retaining screws.

4. Disconnect the lamp assembly wires at the

connectors in the back panel area.

5. Pull the lamp assembly wires out through the oven cavity.

Note:

String can be tied on the end of the light assembly wires to aid in feeding the

new wires back through the holes in the side insulation panel.

Reassembly

1. Feed the new wire connectors back through the hole in the side insulation panel.
2. Refit in reverse manner.

Follow the reassembly procedure. (refer to Section 7.5)

Flat head

Screwdriver

Swivelling
Retaining
Tab

Figure 7.13

Lamp Holder

Retaining Screws

Figure .14

Содержание Titan Aerotech OD302EU








































































Результаты поиска

Содержание Titan Aerotech OD302EU

Отзывы:

Похожие инструкции для Titan Aerotech OD302EU

Бренды по названию

Популярные бренды

Fisher & Paykel Titan Aerotech OD302EU, Руководство по обслуживанию

Результаты поиска

Содержание Titan Aerotech OD302EU

Отзывы:

Похожие инструкции для Titan Aerotech OD302EU

Бренды по названию

Популярные бренды