manualshive.com logo in svg

Fisher & Paykel Titan Aerotech OD302EU, Руководство по обслуживанию

Поделиться
Скачать
Fisher & Paykel Titan Aerotech OD302EU Скачать руководство пользователя страница 65

Service Manual 546596A: 302 Series Titan Oven

June 2005

 65

Door Inner Assembly

Figure 7.22a

Glass Pane removal

1.  Remove the four screws securing the top retaining bracket. (no. 1)
2.  Loosen the five screws on the insulation retainer panel. (no. 7)
3.  Slide out the heat reflective glass pane. (no. 5)
4.  Remove the inner glass pane and gasket. (no.’s 3&4)

Note:

  If transferring the gasket to a replacement glass pane then ensure the gasket

join is located at the top of the door.

Note:

  

The glass pane has a reflective coating on one side only.

  Ensure that the

coating is facing the oven cavity when reassembled.

ƒ

  To test if a glass pane has a heat reflecting coating, use an ohmmeter to test for

continuity on the glass surface.  If there is continuity then the glass will be coated.

Reassembly

ƒ

  Refit in reverse manner.

ƒ

  Ensure all glass surfaces are clean.

Содержание Titan Aerotech OD302EU








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды