manualshive.com logo in svg

Fisher & Paykel Titan Aerotech OD302EU, Руководство по обслуживанию

Поделиться
Скачать
Fisher & Paykel Titan Aerotech OD302EU Скачать руководство пользователя страница 62

Service Manual 546596A: 302 Series Titan Oven

June 2005

 62

7.16

 

Cooling Fan

Location:

  Back and top panel areas

Removal

ƒ

  Follow the general servicing instructions for components in the back panel area.

(refer to Section 7.3)

For single ovens and upper cooling fan on double ovens.

1.  Remove the top panel
2.  Remove the wires from the cooling fan motor.
3.  Remove the two screws on the left of the cooling fan and slide it out from the locating

slot.

4.  Remove the four small retaining screws for the cooling fan side brackets and transfer

the brackets to the replacement cooling fan.

Note:

  Check the replacement cooling fan is specified as in section 2.8.

For lower cooling fan on double ovens.

1.  Remove the back panel.  (refer to Section 7.3)
2.  Remove the wires from the cooling fan motor.

3.  Remove the two screws on the right of the cooling fan and slide it out from the

locating slot.

4.  Remove the four small retaining screws for the cooling fan side brackets and transfer

the brackets to the replacement cooling fan.

Note:

  Check the replacement cooling fan is specified as in section 2.8.

Reassembly

ƒ

  Refit in reverse manner.

ƒ

  Follow the reassembly procedure.  (refer to Section 7.5)

7.17

 

Vent Fan

Location:

  In the back panel area

Removal
For single ovens and upper cavity in double ovens

1.  Follow the general servicing instructions for components in

the back panel area.  (refer to Section 7.3)

2.  Remove the vent fan retaining screws.
3.  Remove the longest section of vent ducting.
4.  Remove the vent fan wires.
5.  Lift the vent fan out of the vent ducting and rotate counter-

clockwise to clear surrounding parts.

6.  Separate the vent fan from the vent tube.

For lower cavity in double ovens

1.  Follow the general servicing instructions for components in

the back panel area.  (refer to Section 7.3)

2.  Remove the vent fan retaining screw.
3.  Remove the lower section of vent ducting.

Lower
Ducting
Section

Longest
Ducting
Section

Figure 7.17

Содержание Titan Aerotech OD302EU








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды