manualshive.com logo in svg

Fisher & Paykel Titan Aerotech OD302EU, Руководство по обслуживанию

Поделиться
Скачать
Fisher & Paykel Titan Aerotech OD302EU Скачать руководство пользователя страница 60

Service Manual 546596A: 302 Series Titan Oven

June 2005

 60

7.15

 

Oven Elements

Broil / Grill Element

Location:  

Top of the oven cavity

Removal

1.  Remove the fan shroud.  (refer to Section 7.19)
2.  Remove the screws securing the Broil / Grill element to the top of the oven cavity and

the support frame to the cavity roof.

3.  Pull the Broil / Grill element through the hole in the oven cavity until the element

terminals are accessible.

Note:

  Tilt the element forward so that the element terminals will clear the hole in the

oven cavity.
4.  Disconnect the wires and connect to the replacement element.

Reassembly

ƒ

  Refit in reverse manner.

ƒ

  Check the element operation.  (refer to Diagnostics Section 4.3)

Fan Element

Location:  

Rear of the oven cavity

Removal

1.  Remove the fan shroud.  (refer to Section 7.19)
2.  Remove the screws securing the fan element to the rear of oven.
3.  Pull the element through the hole in the oven cavity until the wires are accessible.
4.  Disconnect the wires and connect to the replacement element.

Reassembly

ƒ

  Refit in reverse manner.

ƒ

  Check the element operation.  (refer to Diagnostics Section 4.3)

Содержание Titan Aerotech OD302EU








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды