manualshive.com logo in svg

Fisher & Paykel Titan Aerotech OD302EU, Руководство по обслуживанию

Поделиться
Скачать
Fisher & Paykel Titan Aerotech OD302EU Скачать руководство пользователя страница 53

Service Manual 546596A: 302 Series Titan Oven

June 2005

 53

L.C.D Lenses:
Removal

1.  Follow the procedure for removal of L.C.D modules above to step 4.
2.  Remove the damaged lens and clean the old adhesive strip area.
3.  Remove the adhesive tape backing strip from the replacement lens.
4.  Remove the protective strip from the replacement L.C.D lens and attach it ensuring it

is fitted squarely.

Note:

 Take care not to leave fingerprints or visible marks on any lens surface.

Reassembly

ƒ

  Refit in reverse manner.

Note:  

Ensure the wiring harness wires are clear of possible crush points when

reassembling.

ƒ

  Follow the reassembly procedure.  (refer to Section 7.5)

7.8

 

Clock Module or Buttons

Location:  

Control Panel

Removal

1.  Follow the general servicing instructions for components around the control panel

area.  (refer to Section 7.2)

2.  Remove the temperature/oven mode knobs and the clock twist button.
3.  Disconnect the earth wire and remove the mounting panel.
4. Disconnect the wiring harness and transfer to the replacement clock module or

replace the button assembly.

5.  If replacing the clock module, remove the protective strip from screen.

Note:

 Take care not to leave fingerprints or visible marks on any lens surface.

Reassembly

ƒ

  Refit in reverse manner.

Note:

  Ensure the wiring harness wires are clear of possible crush points when

reassembling.

ƒ

  Follow reassembly procedure.  (refer to Section 7.5)

Содержание Titan Aerotech OD302EU








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды