FISCHER FISCHERSCOPE X-RAY 5000 Series, Руководство оператора

Страница: 53 / 188

Closing a Block (Order no. / Operator) Handling of Measurement Data and Statistical Evaluations
FISCHERSCOPE
®
X-RAY 53
To open the dialog window “Order no. / Operator”

Menu command “Evaluation > Order no. / Operator”, or
The two upper entry fields “Order no.” and “Batch no.” are linked to
the block and their contents are stored together with the block data.
The content of the first entry field appears in the last line of the
statistics window.
The third entry field “Operator” is assigned to each single reading
and stored together with that reading; it appears as a column in the
list display mode and in the status bar.
All entry fields are list fields, i.e., each new entry is stored in a list
that you can open by clicking the arrow at its right border. You can
select all previous entries from these lists.
Closing a block Closing a block
To close a block click the command button “Close block” (cf. image
to the side) or select the command “Close block” from the
“Evaluation” menu.
A block is considered closed when the “Block closed” icon appears
in the upper left corner of the Statistics window. If a block is closed,
the next measurement will start the next block and numbering of the
single readings will again start with the number n = 1. You can also
close a block by clicking the command button [Close block] from the
dialog window “Block result” of the sub menu “Evaluate Single
Block” (Menu “Evaluation”).
By starting a new block, you can enter new contents in the three
entry boxes of the dialog window “Order no. / Operator”. You can
not subsequently alter the contents of these fields if the block has
been closed.