Fischer Panda Panda 14.000 NE PVK-U, Руководство по эксплуатации

Страница: 27 / 98

The Panda Generator
Panda 14.000 NE PVK-U S00420 - Chapter A: The Panda Generator Page 23
A.2.8 Ecternal components
AC-Control box
At operating the generator the operating
voltage of 120/230 and/or 230/400V lies
at the AC-Control box. It must be guaran-
teed that the generator cannot be inadver-
tently started, if the Control box is opened.
For this reason the negative pole of the
starter battery is to be disclamped with all
work on the electrical system.
Fig. A.47: AC-Control box
Voltage control VCS
The voltage is regulated by the VCS in
connection with the actuator. The adju-
sting points serve only as security for the
fact that on disturbances of the VCS the
upper and lower point cannot be excee-
ded. The illustration shows the printed
board, which is accommodated in the AC-
Control box
Fig. A.48: VCS
Electrical fuel pump
The Panda generator is always supplied
with an external, electrical (12 V of DC)
fuel pump. The fuel pump must be always
installed in the proximity of the tank. The
electrical connections with the lead plan-
ned for it are before-installed at the gene-
rator. Since the suction height and the
supply pressure are limited, it can be
sometimes possible that for reinforcement
a second pump must be installed.
Fig. A.49: Electrical fuel pump