Fischer Panda 10000i, Руководство пользователя

Страница: 130 / 218

Maintenance Instructions
Seite/Page 130 - Kaptitel/Chapter 7: Maintenance Instructions 16.1.15
Fig. 7.13-3: Injection nozzles
3. Loosen the union nut on the injection lines (1). Wrench
with W.A.F. of 17 mm.
For assembly:
• Blast dust out of the lines using compressed air. Then,
reassemble the lines by proceeding in the reverse order of
steps.
(1) Injection line
Fig. 7.13-4: Injection nozzles
Nozzle holder assembly and glow plug
1. Dismount the return line (1). Wrench with W.A.F. of
17 mm.
2. Remove the nozzle holder assembly (4). Wrench with
W.A.F. of 21 mm.
3. Remove the copper seal (5) and the heat shield (6).
4. Dismount the connector (2) from the glow plugs (3) See
Kapitel 7.14, “Replacing the Glow Plugs,” auf Seite 131.
5. Remove the glow plugs (3). See Kapitel 7.14, “Replacing
the Glow Plugs,” auf Seite 131.
For assembly:
• Replace the copper seal and the heat shield with new parts.
(1) Return line
(2) Connector
(3) Glow plug
(4) Nozzle holder assembly
(5) Copper seal
(6) Heat shield
1
Torque Injection line union nut 24.5 to 34.3 Nm
2.5 to 3.5 kgm
18.1 to 25.3 pound-foot
17
1
2
3
4
Torque Fixing nut for overflow
oil line 19.6 to 24.5 Nm.
2.0 to 2.5 kgm
14.5 to 18.1 pound-foot
Nozzle holder assembly 49.0 to 68.6 Nm
5.0 to 7.0 kgm
36.2 to 50.6 pound-foot
Glow plug 7.8 to 14.7 Nm.
0.8 to 1.5 kgm
5.8 to 10.8 pound-foot