Fischer Connectors FOH, Инструкция по сборке

Страница: 14 / 23

Assembly instructions Rev 7.1
14
This document is the property of Fischer Connectors.
This document must not be reproduced or distributed, in whole or in part, without prior written permission of Fischer Connectors.
7 Polishing
It is recommended polishing the fiber using a polishing machine.
Polish the fiber according to the machine manufacturer’s instructions.
Picture Process Tools
PC termini
Step1 : Air polish
Holding the polishing bushing and
terminus, place the polishing
bushing on the film.
Using light pressure on the
ferrule, polish the endface of the
ferrule in a small circular motion.

Polishing film:
9µm Silicon
carbide

Polishing Pad :
N/A

Lubricant: N/A

Tool: FO-10090
Clean the polishing pad with
demineralized water and lint-free
cloth, from the center outwards.
Spray some demineralized water
on the polishing pad and place
the polishing film, starting at
edges of the polishing pad.
Spray abundantly demineralized
water on the polishing film.
Après
cleave
Air
Polish
Après
Air
Polish