Fischer Connectors FOH, Инструкция по сборке

Страница: 17 / 23

Assembly instructions Rev 7.1
17
This document is the property of Fischer Connectors.
This document must not be reproduced or distributed, in whole or in part, without prior written permission of Fischer Connectors.
Geometrical control :
Ferrule Radius[mm]:
Min 5 - Max 12
Apex Offset[um]:
Min 0.0 – Max 50.0
If fail, repeat from step 3.
Fiber core inspection :
Examine the endface of the
ferrule for scratches according to
left pictures.
If fail, repeat from step 4.
If not installing the connector
immediately, install a protective
cover onto terminus to prevent
contamination to the endface of
the ferrule.
8° APC termini
Step1 : Air polish
Holding the polishing bushing and
terminus, place the polishing
bushing on the film.
Using light pressure on the
ferrule, polish the endface of the
ferrule in a small circular motion.

Polishing film:
9µm Silicon carbide

Polishing Pad :
N/A

Lubricant: N/A

Tool: FO-10090
NOK
OK
Après
cleave
Air
Polish
Après
Air
Polish