Assembly instructions Rev 7.1
9
This document is the property of Fischer Connectors.
This document must not be reproduced or distributed, in whole or in part, without prior written permission of Fischer Connectors.
5
FOH R01, R03 & R13 Receptacles with Wire Set
Assembly steps
Components list :
A – Connector Body
B – Insulator
C – Termini (Electric &
optic)
D – Support Washer
E – Crimp Sleeve
F – Shrink Tube
G – O-ring
H – Wire Set Body
I – Wire Set Nut
J – Connector Panel Seal
K – Connector Nut
Picture
Process
Tools
Slide over the cable :
-
the Wire Set Nut “I”
-
the Wire Set Body “H”
-
The O-ring “G”
-
the Shrink Tube “F”
-
the Crimp Sleeve “E”
Strip the cable to the dimensions
as given on the picture.
Ruler, aramid shears,
jacket stripper,
and strip tool
Terminus assembly : see section 6
Uniformly distribute the cable
strength members around the
back of the Terminus “B”.
Slide the Crimp Sleeve “E” over
the cable strength members until
the end of the crimp sleeve
bottoms against the Terminus
“B”.
Find tools drawing in
appendixes.
A
B
C
D
E
F
H
I
G
J
K