Assembly instructions Rev 7.1
18
This document is the property of Fischer Connectors.
This document must not be reproduced or distributed, in whole or in part, without prior written permission of Fischer Connectors.
Clean the polishing pad with
demineralized water and lint-free
cloth, from the center outwards.
Spray some demineralized water
on the polishing pad and place
the polishing film, starting at
edges of the polishing pad.
Spray abundantly demineralized
water on the polishing film.
Step 2 :
Polish the termini with 8° angle
using the fixture tool.
Make sure the endface of the
ferrule is fully polished, as shown
on the left pictures.
If not, repeat from step 2.
Polishing film:
5µm Diamond
Polishing Pad:
Glass
Lubricant: DI-water
Fixture tool:
TX00.285
Wipe abundantly the polishing
tool holding the termini with
demineralized water and clean it
carefully with a lint-free cloth.
Use an airpressure gun to remove
residual water.
NOK
OK
