Assembly instructions Rev 7.1
4
This document is the property of Fischer Connectors.
This document must not be reproduced or distributed, in whole or in part, without prior written permission of Fischer Connectors.
4
FOH Plugs & Receptacles with Potting Set
Assembly steps
Components list :
A – Sleeve Holder
B – Connector Body
C – Insulator
D – Optical termini
E – Electrical termini
F – Support Washer
G – O-ring Seal
H – Potting Set Body
I – Crimping Sleeve
J – Rear Nut
K – Shrink Tube
L – Bend Relief
Note : the pictures shown in this section represent a P01 Plug.
The following assembly steps are valid for P01 plug, as well as R01, R03, R13 and R50 receptacles, except the final
step (sleeve holder assembly).
Assembly steps
Picture
Process
Tools
Slide over the cable :
-
the Bend Relief “L”
-
the Shrink Tube “K”
-
Crimping sleeve”I”
-
the Rear Nut “J”
-
the Potting Set Body “P”
-
the O-Ring Seal “G”
Strip the cable to the dimensions
as given on the picture.
Ruler, aramid shears,
jacket stripper,
and strip tool
Terminus assembly : see section 6
Polishing: see section 7
A
B
C
D
E
G
I
J
K
L
F
H
