Assembly instructions Rev 7.1
5
This document is the property of Fischer Connectors.
This document must not be reproduced or distributed, in whole or in part, without prior written permission of Fischer Connectors.
Insert all the termini “D” & ”E”
into the insulator “C”.
When you insert the terminus
”D”, be careful to turn it during
the insertion to not “bend” the
contact O-ring.
Pin Layout front view.
Place the Support Washer “F”
around the termini ”D” & “E”.
Push the contact bloc (termini
“D” &”E” + insulator “C”) with the
Support Washer ”F” until it clips.
Receptacle
Plug
Click
