How to Program Options on 2-Way Remotes with Separate Lock and Unlock Buttons
W
ith 2 W
ay
R
emotes
(W
ait for chirp
between each tap)
Scroll Through
Menu (W
ait for chirp
between each tap)
W
ait for corresponding parking light flash and/
or siren chirp before selecting the option
Select Option 1
Select Option 2
Select Option 3
Select Option 4
Option
Menu 1
Lock + Unlock for 2.5
seconds then Lock + Unlock
for 2.5 seconds
Tap Key
Button
Tap Lock
Button
Tap Unlock
Button
Hold Trunk
Button for
2.5 seconds
Tap Key
Button
Option
Menu 2
Lock + Unlock for 2.5
seconds then Lock + Key for
2.5 seconds
Tap Key
Button
Tap Lock
Button
Tap Unlock
Button
Hold Trunk
Button for
2.5 seconds
Tap Key
Button
Option
Menu 3
Lock + Key for 2.5 seconds
then Lock + Unlock for 2.5
seconds
Tap Key
Button
Tap Lock
Button
Tap Unlock
Button
Hold Trunk
Button for
2.5 seconds
Tap Key
Button
Option
Menu 4
Lock + Key for 2.5 seconds
then Lock + Key for 2.5
seconds
Tap Key
Button
Tap Lock
Button
Tap Unlock
Button
Hold Trunk
Button for
2.5 seconds
Tap Key
Button
STEP 2:
Scroll through menu allowing for 1 parking light flash and/or siren chirp per step.
STEP 3:
Once finished scrolling through the menu wait for the parking lights and/or siren chirp to confirm
the option number. i.e. option 2-04 will flash 4 times. Then use one of the table selections to select the
option corresponding to your desired setting.
Resetting to Factory Defaults: To reset the options in a particular menu group, enter the menu shown in the
above tables. To reset options with a 2 Way remote tap button 3 three times. To reset options with a 1 Way
remote tap the Key/Start button 3 times. Wait for the siren to chip and parking lights to flash between each
tap. After the third tap, the option menu will reset and the siren will chirp three times. This must be done for
each option group that needs to be reset.
CM6300
Install Guide
Alarm System
www.firstechonline.com | www.compustar.com
Copyright 2012 Firstech, LLC.
Page 29
