First Products UA60T, Руководство оператора и список запчастей

Страница: 16 / 54

First Products UA-60T Operator’s Manual
Operation bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
15
Offsetting unit
The unit may be operated either directly behind the
tow vehicle or offset to the side of the vehicle. The
unit can be offset by changing the tongue position,
Figure 12. The offset can be adjusted between the
two outer positions shown by aligning the holes in
the tongue with either of the sets of holes in the
Tongue Swivel.
Transporting unit
Before transporting the UA-60T from one location
to another, the red handled Cylinder Lock-Bar
located by the lift cylinder must be pinned to the
cylinder to prevent the machine from gradually
leaking down over time. The red handled Cylinder
lock-bar is seen in Figure 13.
The tongue of the unit should also be locked to its
centered position, Figure 12, with the stop bolt
being tightened against the tongue and locked into
place with the jam nut, Figure 14.
The unit should
only be transported while centered behind the
tow vehicle with the stop bolt tightened.
Figure 12. Offsetting Unit
Figure 13. Cylinder Lock Bar
Figure 14. Stop Bolt Location