First Products UA60T, Руководство оператора и список запчастей

Страница: 45 / 54

42
7. Electrical connections are corroded,
loose, or faulty. 7. Check the electrical connections
for good contact. Clean
connector terminals thoroughly
with electrical contact cleaner,
apply dielectric grease and
reconnect.
8. Relay or switch is defective. 8. Contact an Authorized Service
Dealer.
9. Faulty spark plug. 9. Clean, adjust or replace spark
plug..
10. Spark plug wire is not connected. 10. Check the spark plug wire
connection.
Engine loses power
1. Engine load is excessive. 1. Reduce the ground speed.
2. Air Cleaner is dirty. 2. Clean or replace the air cleaner.
3. Oil in crankcase is low. 3. Add oil to the crankcase.
4. Cooling fins and air passage for the
engine are plugged. 4. Remove the obstructions from
the cooling fins and air
passages.
5. Vent in fuel cap is clogged. 5. Clean or replace the fuel cap.
6. Dirt in fuel filter. 6. Replace the fuel filter.
7. Dirt, water, or stale fuel in the fuel
system. 7. Contact an Authorized Service
Dealer.
Engine overheats
1. Engine load is excessive. 1. Reduce ground speed.
2. Oil level in the crankcase is low. 2. Add oil to the crankcase.
3. Cooling fins and air passages for the
engine are clogged 3. Remove the obstructions from
the cooling fins and air
passages.
Rotor Shaft does not
operate
1.
Rotor switch is not in the “ON”
position.
1.
Switch to “ON” position.
2. Relay or switch is defective. 2. Contact an Authorized Service
Dealer.
3. Electrical connections are corroded,
loose, or faulty. 3. Check the electrical connections
for good contact. Clean
connector terminals thoroughly
with electrical contact cleaner,
apply dielectric grease and
reconnect.
4. Drive belt is broken or worn. 4. Change the Belt.
5. Broken or missing idler spring. 5. Replace the spring.