First Products UA60T, Руководство оператора и список запчастей

Страница: 12 / 54

First Products UA-60T Operator’s Manual
Specifications bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
11
position). The PTO switch must be in the off
position to start the engine.
o
Auto Throttle Handle
With the Auto throttle handle in the down
position (locked position) the engine’s RPM
will increase as the machine is lowered into
the ground. As the unit is lifted the engine
will return to idle.
The auto throttle can be disengaged when
auto throttling is not required by raising the
auto throttle handle into the unlocked
position.
o
Hour Meter
The hour meter is connected to the ignition
switch to record the amount of run time on
the unit. The hour meter will work while the
engine is operating.
Transport Options

The UA-60T can be transported by using its
standard 2” ball coupler or its draw bar option
.
Hydraulic Lift System

Hydraulic Pump: ½ Gal/Min Fixed
Displacement Gear Pump

Hydraulic Cylinder: 2” Bore with 8” Stroke

Hydraulic Oil Type: A68 Hydraulic Oil .

Hydraulic Oil Capacity: 1.7 gal. (6.4 L)
Tires & Wheels

Tires are 20 ½” on 8” wheels fastened with five
lug nuts on 5 ½” centers.

Tires have highway tread and are 16 ply with a
load rating F.
Dimensions
Overall Width:
95 ½” (Outside of Tires)
Overall Height: 48 ½” (Raised & Level)
Overall Depth: 36” (Tongue Removed)
80” (Back of Fender to
Tongue)
Torque Requirements
Engine Mounting bolts 38-40 ft-lbs
(51 – 56 N-m)
Wheel Lug nuts 90-95 ft-lbs
(122-129 N-m)
Tines in Rotor
Aera-vator Shaft 210-215 ft-lbs
(284- 291 N-m)
Implement frame to Tractor
mount bolts 111 – 115 ft-lbs
(150 -156 N-m)
1/4 UNC Standard Bolts 11 ft-lbs (14 N-m)
5/16 UNC Standard Bolts 21 ft-lbs (28 N-m)
3/8 UNC Standard Bolts 38 ft-lbs (51 N-m)
1/2 UNC Standard Bolts 85 ft-lbs (120 N-m)
5/8 UNC Standard Bolts 175 ft-lbs (235 N-m)
Figure 4. Standard 2” Ball Coupler
Figure 5. Draw Bar Option