First Products UA60T, Руководство оператора и список запчастей

Страница: 8 / 54

First Products UA-60T Operator’s Manual
Safety bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
7
Maintenance and Storage

Lift aerator out of ground, stop engine, and
remove key before adjusting, cleaning, or
repairing.

Keep power transmission components (belts,
pump, engine, etc.) free of debris. The debris
can become combustible which may result in a
fire.

Let engine cool before storing and do not store
near flame or any enclosed area where open
pilot lights or heat appliances are present.

Drain fuel from tank while storing.

Pin the cylinder lock-out bar into place and
carefully release pressure from components with
stored energy.

Never allow untrained personnel to service
machine.

Disconnect the negative terminal cable from the
battery before making any repairs. If battery is
required to be removed, always disconnect the
negative cable first and always connect the
positive first while reinstalling.

Charge battery in an open, well-ventilated area,
away from sparks and flames.

Keep all guards, shields, and all safety devices
in place and in safe working condition.

Check bolts frequently to maintain proper
tightness.

Check belts frequently for proper tensioning and
wear condition.

Check all moving components for worn or
deteriorating components that could create a
hazard.

All replacement parts must be the same as or
equivalent to the parts supplied as original
equipment.

Check fluid levels daily during operation. If
fluids are needed, fill with the correct fluids
specified.

Inspect all hydraulic hoses and adapters daily
for leaks or defects.

When brushes are attached, Anti-tip leg must be
extended before disconnecting hitch from tow
vehicle.
Anti-tip Leg