First Office STAKS, Руководство по сборке, Страница: 22 / 50

STAKS Crossover Casegoods by FIRST OFFICE | 22
See bracket plan drawing for locations of cantilever brackets and pedestal placement.
Note: Cantilever tool is not required, but does simplify installation.
1. Place pedestals in place - DO NOT attach to panels at this time.
2. Position cantilever brackets as shown on bracket drawing.
3. Any span of over 42" between supports needs an additional cantilever bracket.
4. Use two screws in slotted holes.
5. Make sure top of bracket is 21 3/8" from bottom edge of panel, adjust if needed.
6. Use two more screws to secure bracket in place.
Cantilever Placement
LOW HEIGHT TOPS