First Light C-BLUE One, Руководство пользователя

Страница: 38 / 67

38
This value depends on the
cropping configuration and the
number of bits per pixel.
Image correction
The image corrections that can be applied to the frames in real time are the following.
Table 24 - Description of the image corrections available
Name Access Value Description
GlowReduction
RW Off / On Glow reduction is disabled / applied.
Trigger mode
The acquisition can be triggered by various signals. The registers used to configure this mode are the
following.
Name Access Values Description
TriggerSelector
RW AcquisitionStart Trigger will be set up to start a continuous
acquisition.
AcquisitionEnd Trigger will be set up to stop a continuous
acquisition.
FrameBurstStart Trigger will be set up to start an
acquisition of
“AcquisitionBurstFrameCount” frames.
FrameBurstEnd Trigger will be set up to stop an
acquisition of
“AcquisitionBurstFrameCount” frames.
FrameStart Trigger will be set up to start a single
frame acquisition.
FrameEnd Not implemented
ExposureStart Trigger will be set up to start the exposure
of a single frame acquisition.
ExposureEnd Trigger will be set up to stop the exposure
of a single frame acquisition.
TriggerMode
[TriggerSelector]
RW ON The selected trigger is enabled
OFF The selected trigger is disabled
TriggerSource
[TriggerSelector]
RW Software The selected trigger will be software
generated.
Line0 The selected trigger will be sent through
the LEMO 0 I/0 connector.
Line1 The selected trigger will be sent through
the LEMO 1 I/0 connector.
LinkTrigger0 The selected trigger will be sent through
the master Coaxpress cable.
LinkTrigger1 The selected trigger will be sent through
the slave Coaxpress cable.