First Light C-BLUE One Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 67

First Light C-BLUE One Скачать руководство пользователя страница 34

34

Please refer to the Graphical User Interface manual

Software Development Kit

A Software Development Kit (SDK) is also provided with your camera.
It will allow developers to code their own interface to control the camera. A code in C/C++ is provided
to make a demo, and additional example codes are provided in several languages.
This software development kit has its own manual.

Please refer to the Software Development Kit user manual

Quick start

Powering ON & camera connection

The camera is powered either when power is applied on LEMO® connector or when both CoaXPress

®

cables are plugged to a PoCXP compliant frame grabber.
The camera complies with the PoCXP device requirements defined in the CoaXPress

®

Version 2.0

standard, meaning that a PoCXP compliant grabber should automatically detect the PoCXP feature of
the camera and power it up automatically.

Note: Some grabbers can be configured to disable automatic PoCXP detection. If the camera does not
power up when connected to a PoCXP compliant grabber, please check that the PoCXP discovery is
enabled.

The external power supply has precedence over PoCXP, meaning that the camera will be powered
using the LEMO® power supply if powered.
If the LEMO® connector is powered after the camera has been powered using PoCXP, the camera will
automatically switch to external power supply, without rebooting, and PoCXP will no longer be used.

Note: Dynamically switching from external power supply to PoCXP is not supported. The camera may
continue to run, or may reboot, depending on various factors (actual power consumption, frame grabber
configuration….)

Powering OFF & camera disconnection

Please use the register “DeviceShutdown” before unplugging the camera. The shutdown is
recommended (specially to store the latest logs), however, the direct switch off does not damage it.

Unplug all power cables (CXP cables or LEMO® connector power cable).
If you use LEMO® cable, first unplug the power supply from the line plug, then unplug the LEMO®
CONNECTORS cable from the camera.

Camera storage

Please follow the recommendations concerning camera storage in paragraph 4.2.

«
...
32
33
34
35
36
...
»

Содержание C-BLUE One




































































Отзывы:

Нет отзывов