First Light C-BLUE One, Руководство пользователя

Страница: 37 / 67

37
Table 22 – Description of the acquisition modes
Name
Access Value
Description
AcquisitionMode
RW
Continuous The frames are captured continuously until
stopped with the AcquisitionStop command.
AcquisitionStart
RW
Command
Starts the Acquisition of the device. The number
of frames captured is specified by
AcquisitionMode.
AcquisitionStop
RW
Command
Stops the Acquisition of the device at the end of
the current Frame.
AcquisitionAbort
RW
Command
Abords the acquisition immmediatly. This will
end capture without completing the current
frame or waiting on a trigger. If no acquisition is
in progress, the command is ignored.
AcquisitionFrame
Count
RW Integer Reserved For Future Use.
Integration time and framerate
The minimum/maximum frame rate and exposure duration depends on the sensor and are returned
reading the following registers
In
Timed exposure mode, the exposure duration time is set using the ExposureTime or ExposureAuto
features, and the exposure starts with the FrameStart or LineStart .
Table 23 - Description of the integration time and framerate controls
Name Access Value Description
ExposureMode
RW
Timed
Timed exposure.
ExposureTime
RW
User defined value in the
range
[
ExposureTimeMinReg-
ExposureTimeMaxReg
]
Sets the Exposure time (in µs)
when ExposureMode is Timed
and ExposureAuto is Off. This
controls the duration where the
photosensitive cells are exposed
to light.
ExposureTimeMinReg
RO xxx µs NA
ExposureTimeMaxReg
RO ~ (1/framerate) NA
AcquisitionFrameRa
te
RW
User defined value in the
range
[
AcquisitionFrameRat
eMinReg-
AcquisitionFrameRat
eMaxReg
]
Controls the acquisition rate (in
Hz) at which the frames are
captured.
AcquisitionFrameRa
teMinReg
RO
xxx frame/s Minimum acquisition rate (in Hz)
at which the frames are
captured.
AcquisitionFrameRa
teMaxReg
RO
xxx
Maximum acquisition rate (in
Hz) at which the frames are
captured.