Firenzo kompact ag, Инструкция по установке и эксплуатации

Страница: 8 / 45

Kompact RU Installation Version 14/4/14 8
5. INSERT FLUE SYSTEM
For Installation in a Masonry Fireplace
WARNING; The appliance and flue
system must be installed in
accordance with AS/NZS 2918:2001
and the appropriate requirements of
the relevant building code or codes.
1. Position heater in fireplace. Extend
plumb line from top of chimney,
ensuring heater spigot is in line with
top of chimney. If not, flue pipe offsets
will be required.
2. Assemble flue pipes ensuring all
seams are in line and assembly is
straight and tight with crimped ends
pointing downwards.
Secure flue pipes with at least 3
stainless steel or monel rivets and
seal.
3. Fasten chimney plate supplied onto
the chimney top. The chimney plate
must be weather sealed with silicone
or mortar.
4. Install chimney liner on top of the
chimney plate.
5. Ensure flue pipe is extended over
the chimney liner by 180mm. Secure
top spacer bracket to the flue pipe and
ensure slots fit snugly inside the
chimney liner.
6. Slide flashing cone over top of flue,
until it rests firmly over top spacer.
Ensure ventilation gap is not closed
off. Secure with pop rivets or self-
tapping screws.
7. Fit anti-down draught cowl. Do not
secure as it must be removed for
cleaning.
CAUTION: Mixing of flue system components from different sources or modifying
the dimensional specifications of components may result in hazardous conditions.
Where such action is considered the flue manufacturer should be consulted in the
first instance.
Diagram 4