Firenzo kompact ag, Инструкция по установке и эксплуатации

Страница: 42 / 45

Kompact RU Installation Version 14/4/14 42
FLUE
Creosote is caused by burning wet fuel, leaving particles and condensation to
build up on the inside of any closed solid fuel heater. Creosote and soot left to
build up will restrict the flue and cause decreased heat performance and flue
fires. Your heating retailer or local reputable chimney sweep will be able to
assist with flue cleaning.
SECONDARY CHAMBER
The baffles (horizontal bricks in the ceiling of firebox) are critical to the heaters
performance. They should be checked annually during flue cleaning and
replaced if signs of deterioration are evident.
If the baffles are removed the warranty will be void.
DOOR HANDLE AND HINGES
Light lubrication is recommended once a year before the first autumn burn. Use
a little GRAPHITE grease, available from any garage or engineering outlet.
PAINTWORK
Athena Castings
If any scratches or surface marks have appeared on the paintwork, use
‘Stovebright’ Satin Black paint to retouch, taking note of the manufacturer’s
instructions for spraying. Never spray a hot fire.
Powder Coating
Clean carefully with a damp cloth when cold. The powder coated finish can
scratch.
GOLD, BLACK OR CHROME PLATED RAILS
The gold, black or chrome plated rails must not come in contact with abrasive
materials.
Use a clean damp cloth when the heater is cool, if cleaning is required.
16. DOOR GLASS
The inserts are equipped with a self-cleaning glass air wash system. A well
burning fire will clean the window.
Oven cleaner can be used for removal of heavy build-up.
Do NOT clean glass while hot.
If a replacement of glass is required, only high heat and impact resistant
ceramic glass is able to be used. Insulating material for the glass and all seals
should be replaced at this time also.
NEVER place glass directly against the door. Without the insulation seal tape in
place, the glass is likely to shatter. Your Firenzo agent will be able to supply
any spare parts.