Firenzo kompact ag, Инструкция по установке и эксплуатации

Страница: 5 / 45

Kompact RU Installation Version 14/4/14 5
If the heater is to be installed onto a SOLID concrete floor protector (hearth) that
has no heat sensitive materials in its construction it must meet the following
MINIMIUM dimension as marked A & B from Diagram 1:
A 300mm from breast of fire to outer edge of concrete floor protector (hearth)
B 30mm from heat sensitive floor to upper edge of concrete floor protector
(hearth)
The minimum width of floor protector must be 820mm and/or 410mm from the
centre of the heater.
2B FLOOR PROTECTOR REQUIREMENTS
HEAT SENSITIVE FLOORS
An Insulated Floor
Protector (Hearth) must
consist of a minimum of
20mm of Insulation
board (Micore 160,
Supalux, Promatech H,
Eterpan LD or product of
similar thermal resistance)
and tiles/slate or similar
with sealed joints on top
surface to protect from
spilt ash/embers.
Dimensions A & B from above diagram must meet the following schedule:
B HEIGHT (mm) A FROM FIRE BREAST
Level Ømm 500mm
30mm 376mm
HEAT SENSITIVE FLOOR
INSULATED FLOOR PROTECTOR
FIRE BREAST / WALL
A
FASCIA
B
Diagram 2